1 1

Powerwerks PW50BT 3 Channel 50 Watt Portable Personal Bluetooth PA System #0102*

Powerwerks PW50BT 3 Channel 50 Watt Portable Personal Bluetooth PA System #0102*

$ 79.00
$ 79.00
Sale Sold out
Shipping calculated at checkout.

Powerwerks PW50BT 3 Channel 50 Watt Portable Personal Bluetooth PA System #0102*

Used with wear associated with normal use.  Minor scuffs/scratches.   Power LED does not light up.  Works as it should.  

● Equipped with Eminence® Speakers
● 50 Watts Output Power
● 2 MIC/Line Inputs, XLR with Phantom Power & 1/4" Line Input
● AUX IN with 1/8" Stereo Jack Summed to Mono
● POWERLINK for Ease of Input Expansion

● Connect Any Bluetooth Compatible Device Wirelessly

Output Power 1%
50W, 8 Ohm load
Accepted Inputs
Ch1 and Ch2, Mic XLR Balanced, Line Level 1/4" Un-balanced
Ch 3, 1/8" Headphone/line Level Stereo, mixed mono
Frequency Response
20Hz-20kHz, Actual response is tailored to speaker cabinet for accurate acoustical response
Hum & Noise
-65dB, Residual Noise, all level controls 0% (minimum)
-48dB, Nominal System Noise, all level controls at 50%
System Gain (Measurement made at 1kHz)
+70dB, Mic to Speaker Output (Ch1 & Ch2)
+56dB, Line to Speaker Output (Ch1 & Ch2)
+42dB, Aux In to Speaker Output
Channel EQ (high, low)
4kHz and above, 800Hz and below
POWERLINK (IN and OUT)
Both jacks accept a balanced input and sends a pre-master volume output mix of channels.
Recommended use: Linking two PW50 units together or adding a PW4EX mixer
Subwoofer Out
Line Out, 20Hz-150Hz
Phantom Power
+15V, Mic inputs (Ch1 & Ch2)
Speakers
Two 4 1/2", 50W 4 Ohm each
Horn
3 1/2" piezo driver
Power Capacity
50W RMS
Frequency Response
60Hz-20kHz, Full range (subwoofer jack not used)
150Hz-20kHz, Crossover Active (1/4"mono plug in subwoofer jack)
Nominal Impedance
8 Ohms, NOT designed for external speakers
Dimensions (W,H,D) mm
190mm, 460mm, 165mm
Dimensions (W,H,D) inches
7 1/2", 18", 6 1/2"
Weight kg
6.7 kg
Weight lbs
14.7 lbs
View full details