Output Power 1%
| 2 x 75W, 2 x 4 ohm load
|
Accepted Inputs
| Ch1 and Ch2, Mic XLR Balanced, Line Level 1/4" Un-balanced
|
| Ch3, 1/8" Line Level or Bluetooth Device (150TFBT models)
|
Frequency Response
| 20Hz-20kHz, Actual response is tailored to speaker cabinet for accurate acoustical response
|
Hum & Noise
| -46dB, ResidualNoise, all level controls 0% (minimum)
|
| -37dB, Nominal System Noise, all level controls at 50%
|
System Gain/Speaker Output (Measurement at 1kHz)
| +49dB, Mic to Speaker Output (Ch1 & Ch2)
|
| +35dB, Line to Speaker Output (Ch1 & Ch2)
|
| +25dB, Aux In to Speaker Output
|
Channel EQ (high, low)
| 4kHz and above, 800Hz and below
|
POWERLINK (IN and OUT)
| Both jacks accept a balanced input and sends a pre-master volume output mix of channels
|
| Recommended use: Linking two PW150's or adding a PW4EX mixer
|
Subwoofer Out
| Line Out, 20Hz-150Hz
|
Monitor Out
| Line Out, Balanced TRS Output with grounded sleeve
|
Phantom Power
| +15V, Mic inputs (Ch1 & Ch2)
|
Speakers
| Four 4 1/2", 50W 8 ohm each
|
Horn
| 3 1/2" Piezo Driver
|
Power Capacity
| 150W RMS
|
Frequency Response
| 60Hz-20kHz, Full Range (subwoofer jack not used)
|
| 150Hz-20kHz, Crossover Active (1/4" mono plug in subwoofer jack)
|
Nominal Impedance
| 4 Ohm x 2, Not designed for external speakers
|
Bluetooth Module Features
| Bluetooth 3.0EDR compliant. Typical +2dBm Class 2 output power. Audio DAC:94dB SNR. A2DP profile support
|
Dimensions mm (W,H,D)
| 190mm, 715mm, 165mm
|
Dimensions inches (W,H,D)
| 7.5", 28", 6.5"
|
Dimensions kg
| 11.3 kg
|