Output Power 1%
| 50W, 8 Ohm load
|
Accepted Inputs
| Ch1 and Ch2, Mic XLR Balanced, Line Level 1/4" Un-balanced
|
| Ch 3, 1/8" Headphone/line Level Stereo, mixed mono
|
Frequency Response
| 20Hz-20kHz, Actual response is tailored to speaker cabinet for accurate acoustical response
|
Hum & Noise
| -65dB, Residual Noise, all level controls 0% (minimum)
|
| -48dB, Nominal System Noise, all level controls at 50%
|
System Gain (Measurement made at 1kHz)
| +70dB, Mic to Speaker Output (Ch1 & Ch2)
|
| +56dB, Line to Speaker Output (Ch1 & Ch2)
|
| +42dB, Aux In to Speaker Output
|
Channel EQ (high, low)
| 4kHz and above, 800Hz and below
|
POWERLINK (IN and OUT)
| Both jacks accept a balanced input and sends a pre-master volume output mix of channels.
|
| Recommended use: Linking two PW50 units together or adding a PW4EX mixer
|
Subwoofer Out
| Line Out, 20Hz-150Hz
|
Phantom Power
| +15V, Mic inputs (Ch1 & Ch2)
|
Speakers
| Two 4 1/2", 50W 4 Ohm each
|
Horn
| 3 1/2" piezo driver
|
Power Capacity
| 50W RMS
|
Frequency Response
| 60Hz-20kHz, Full range (subwoofer jack not used)
|
| 150Hz-20kHz, Crossover Active (1/4"mono plug in subwoofer jack)
|
Nominal Impedance
| 8 Ohms, NOT designed for external speakers
|
Dimensions (W,H,D) mm
| 190mm, 460mm, 165mm
|
Dimensions (W,H,D) inches
| 7 1/2", 18", 6 1/2"
|
Weight kg
| 6.7 kg
|
Weight lbs
| 14.7 lbs
|