Tascam TM-Drums 4 Drum Microphone Kit TM-50DB TM-50DS TM-50C

Specialty Traders is an Authorized Tascam Dealer!

Tascam TM-Drums 4 Drum Microphone Kit TM-50DB TM-50DS TM-50C

New

Start A Professional Drum Recording With Multiple Microphones Today.

Utilize a multi-microphone set with the US-16x08 audio interface to begin your professional drum recording.

Drum recording is considered as the most difficult part among the microphone recording projects. Since a drum set comes with various drums and percussion, to a start a studio recording, it is important to know about drum miking. We need a several microphones not only for the bass drum, snare drum but also toms, hi-hats and other cymbals to be recorded individually. Thus, at least ten separate microphones are necessary to record a drum session.

When you are just about to begin a drum recording at a beginner stage, it is not easy to own tons of microphones due to the limited budget. In addition, it imay not be so easy to get the right sound from all microphones for a drum recording session since each microphone has different sound characteristics. TM-DRUMS is a drum recording microphone set that fulfills the minimum requirement for multi-microphone drum kit recording, and with this set, anyone can easily challege the drum recording with serveral individual mics.

Music creation in general, especially the bass drum, snare drum, and hi-hats play an important role for keeping the time. Thus, each of those drum part needs to sound clearly from the recording. The TM-DRUMS has two dynamic microphones that can be used for both bass drum and snare drum, and two condenser microphones that can be used for hi-hats or overheads.

If you are planning on purchasing additional microphones later on, you can separate microphones between the overheads and hi-hats, or add extra microphones for toms or even capture the ambient sound in the room.

Specifications:

TM-50DB

Model Dynamic
Directivity Cardioid (Uni-directional)
Frequency response 50Hz - 15,000Hz
Output impedance 400Ω +/-30% (at 1kHz)
Load impedance >1kΩ
Sensitivity -55dB +/-3dB(0dB=1V/Pa at 1kHz)
Connector 3 pin XLR, Male
dimensions 59(W)×118(H)×115(D) mm
Weight 460g(Microphone body only)
Accessory 5/8 to 3/8 conversion adapter

TM-50DS

Model Dynamic
Directivity Cardioid (Uni-directional)
Frequency response 50Hz - 14,000Hz
Output impedance 350Ω +/-30% (at 1kHz)
Load impedance >1kΩ
Sensitivity -56dB +/-3dB (0dB=1V/Pa at 1kHz)
Connector 3 pin XLR, Male
dimensions 42.5(W)×105(H)×98(D) mm
Weight 330g(Microphone body only)
Accessory 5/8 to 3/8 conversion adapter

TM-50C

Model Condenser (16mm diaphragm)
Directivity Cardioid (Uni-directional)
Frequency response 30Hz - 18,000Hz
Output impedance 100Ω +/-30%(at 1kHz)
Load impedance >1kΩ
Sensitivity -38dB +/-3dB (0dB=1V/Pa at 1kHz)
Max. SPL 135dB
S/N ratio 74dB
Connector 3 pin XLR, Male
dimensions 21(W)×117(H)×21(D) mm
Weight 85g(Microphone body only)
Accessory 5/8 to 3/8 conversion adapter

We ship orders the following business day!

We are open Monday - Friday 9:00 AM to 5:00 PM Eastern Standard Time

We respond to questions during regular business hours